Figure 7-42 Installing a riser card tray
Step 8 Connect cables to the riser card.
Step 9 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 10 Install the RH2288H V3. For details, see 3.4 Installing the Server.
Step 11 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 12 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
7.22.2 Installing a PCIe Card on the Mainboard
Install a non-hot-swappable PCIe card to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the PCIe card to be replaced from the mainboard. For details, see 7.21.2
Removing a PCIe Card from the Mainboard.
Step 3 Take the spare PCIe card out of its ESD bag.
Step 4 Insert the PCIe card into a PCIe slot. See step (1) in Figure 7-43.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 185
To Next Page
Loading...
Need help?
General