EasyManuals Logo
Home>Huawei>Server>RH2288H V3

Huawei RH2288H V3 User Manual

Huawei RH2288H V3
350 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #203 background imageLoading...
Page #203 background image
Step 11 Congure the TPM.
NO TE
If the TPM 2.0 is installed and the TXT function is enabled, but the TPM 2.0 status on the
BIOS is unknown, contact technical support.
If a spare TPM is installed:
a. Set the TPM conguration items on the BIOS to ensure that the TPM
settings are the same as the recorded TPM settings. For details, see the
Huawei Server Grantley Platform BIOS Parameter Reference
.
b. Restore the backup data on the spare TPM to overwrite its factory
settings.
If the removed TPM is installed:
a. Check whether the BIOS version of the mainboard where the TPM is
located is earlier than that before the removal.
If yes, upgrade the BIOS version to ensure that the BIOS version of
the mainboard where the TPM is located is not earlier than that
before the removal. For details, see the
FusionServer Pro Rack
Server Upgrade Guide
.
If no, go to Step 11.b.
b. Set the TPM conguration items on the BIOS to ensure that the TPM
settings are the same as the recorded TPM settings. For details, see the
Huawei Server Grantley Platform BIOS Parameter Reference
.
----End
7.25 Removing the DVD Drive
Remove the DVD drive before replacing it with a new one.
With Eight 2.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power
o the RH2288H V3. For details, see 4.2 Powering O the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6
Removing the Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the air duct. For details, see 7.13 Removing the Air Duct.
Step 8 Remove all fan modules. For details, see 7.15 Removing a Fan Module.
Step 9 Press and hold down the latches on both sides of a fan module bracket, and lift
the bracket. Use the same method to lift the other fan module bracket. See steps
(1) and (2) in Figure 7-47.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 190

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei RH2288H V3 and is the answer not in the manual?

Huawei RH2288H V3 Specifications

General IconGeneral
BrandHuawei
ModelRH2288H V3
CategoryServer
LanguageEnglish

Related product manuals