Imagine Selenio 6800+ User Manual

QVM6800+ Installation and Operation Manual 16
Chapter 3: Using ZConfigurator
Using Frame View
Double click on a frame to see the detected QVM cards.
The QVM cards detected are shown with their IP numbers below the frame.
The numbers in circle and squares below IP numbers indicate that these cards are already in a
cascade with the positions indicated. The master card is always numbered 1 in a circle and is
the first card in the cascade. The remaining slave cards have their LOOP IN connector fed from
previous cards and are shown with position numbers in squares.
IP numbers for certain QVM6800+ modules may be edited in frame view. See “Editing QVM
6800+ IP Numbers” on page 21.
Using the Cascade Editor
The cascade editor allows a virtual multiviewer to be constructed using individual QVM6800+
modules. ZConfigurator can manage layouts using cascaded QVM modules as if they were a
single multiviewer.
To use the editor click on Cascade Editor.
In the above example, a virtual multiviewer with 24 inputs has been created out of six
QVM6800+C-T cards from one frame.

Imagine Selenio 6800+ Specifications

General

Brand	Imagine
Model	Selenio 6800+
Category	Monitor
Language	English