QVM6800+ Installation and Operation Manual 51
Chapter 5: Specifications
Frame Genlock Input
Table 5-4. Frame Genlock Input (when used as lock type for QVM6800+)
Outputs
HD-SDI/3G Output
DVI-D
Table 5-6. DVI-D Output
The DVI-D output only supports a digital output and there is no analog RGB output.
Item Specification
Connector 4 BNC per IEC 169-8
Standards PAL-B (ITU-R BT.470-6)
NTSC (SMPTE 170)
Impedance 75Ω
Return Loss >40dB (typical) 25Hz to 30MHz (SMPTE 318M-1999)
Input Level NTSC/PAL-B (1 V pk-to-pk, -4.5 dB to 6.0 dB)
Locking Range +/-10ppm (sync lock only, no burst lock)
Table 5-5. HD-SDI Output Type Specifications
Item HD-SDI 3G SDI
Connector BNC per IEC 169-8 BNC per IEC 169-8
Impedance 75Ω 75Ω
Return loss > 15 dB (typical) to 1.5 GHz > 10 dB from1.5 GHz to 3Ghz
Jitter <0.2 UI (740ps) for 1080i and 720p <0.3 UI for 1080p
Amplitude 800mV +/- 10% 800mV +/- 10%
Rise/Fall Time <270ps for 1080i and 720p <135ps for 1080p
Item Specification
Connector Microcross
Standards DVI-D up to 165MHz
Resolution User programmable to 1920 x 1200
To Next Page
Loading...
Need help?
General
