QVM6800+ Installation and Operation Manual 39
Chapter 3: Using ZConfigurator
System Properties
The system tab shows information about the connected multiviewer such as Unit Type, Serial
Number, Software Version and Connection Type.
System Information
This section of the System tab shows the unit type, serial number, firmware (flash software) and
display version.
The connection name may be changed using ZConfigurator but the serial number and unit
type name cannot.
Using License Keys
Licences are managed using the License tab. See “Licensing” on page 41.
Locking the Front Panel
This feature is not applicable to this multiviewer.
To Next Page
Loading...
