From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library
BAND
SELECT
While in the dual band mode (default), the dual bander
receives simultaneously on the VHF and UHF bands.
Press
[BAND]
to toggle the Operating band between
VHF and UHF. The Operating Band is the band on
which you can transmit as well as receive.
• The position
of
"PTT" on the Display indicates which
band is the Operating band.
VHF
Operating
Band
I
UHF
Receive
only
Ill
CD
144.
Ofn)
44~).
(1(1(1
UHF
Operating
Band
I
VHF
Receive
only
CD
144
• 0(1(1
44fi.
000
Ill
The dual bander can be used in a VHF/VHF
or
UHF/UHF configuration if you prefer. Switching ON
either of the following functions cancels Full Duplex.
The following procedures assume you are currently
using the default VHF/UHF configuration.
•
VHF/VHF
Configuration
1 Press
[BAND]
to select the UHF band as the
Operating band.
2 Press
[F],
[VxV,
UxU]
to toggle between
VHF/UHF and VHF/VHF configurations.
• When VHF/VHF
is
selected, the
UHF
Operating band switches to a
VHF
Operating
band.
Two
VHF frequencies are visible.
CD
144.
o~xi
144.
~)01]
..
•
UHF/UHF
Configuration
1 Press
[BAND]
to select the VHF band as the
Operating band.
2 Press [F], [VxV, UxU] to toggle between
VHF/UHF and UHF/UHF configurations.
• When UHF/UHF is selected, the
VHF
Operating band switches to a UHF Operating
band. Two
UHF
frequencies are visible.
..
CD
4 4
f~i
•
tH]
(1
44~~1.
0>~1(1
15
To Next Page
Loading...
Need help?
General
