From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library
MAINTENANCE
Your dual bander has been factory aligned and tested
to specification before shipment. Under normal
circumstances, the dual bander will operate in
accordance with these operating instructions. All
adjustable trimmers, coils and resistors in the dual
bander were preset at the factory. They should only be
readjusted by a qualified technician who is familiar with
this dual bander and has the necessary test equipment.
Attempting service or alignment without factory
authorization can void the dual bander warranty. When
operated properly, the dual bander will provide years of
service and enjoyment without requiring further
realignment.
SERVICE
NOTE
If it is ever necessary to return the equipment to your
dealer or service center for repair, pack the dual bander
in
its original box and packing material. Include a full
description of the problems experienced. Include your
telephone number along with your name and address in
case the service technician needs to call for further
texplanation while investigating your problem. Don't
return accessory items unless you feel they are directly
related to the service problem.
You may return your dual bander for service to the
authorized
KENWOOD Dealer from whom you
purchased it or any authorized
KENWOOD service
center. A copy of the service report will be returned
with the dual bander. Please do not send
58
subassemblies or printed circuit boards. Send the
complete dual bander. Tag all returned items with your
name and call sign for identification. Please mention
the model and serial number of the dual bander in any
communication regarding the problem.
If you desire to correspond on a technical or operational
problem, please type or print a note that is short,
complete, and to the point. Help us help you by
providing the following:
1 Model and serial number of equipment
2 Question or problem you are having
3 Other equipment
in
your station pertaining to the
problem
4 Meter readings
5 Other related information
CAUTION: Do
not
pack
the equipment in crushed newspapers for
shipment! Extensive damage may result
Note:
• Record the date
of
purchase, serial numb.er
and
dealer from
whom the dual bander
was
purchased.
• For
your
own information, retain a written record
of
any
maintenance performed on the dual bander.
• When claiming warranty service, please
in£1ude
a photocopy
of
the
bill
of
sale,
or
other proof-of-purchase .showing the date
of
sale.
• Remove controls from the dual bander be tore cleaning them.
Use only neutral detergents; no strong chemicals.
To Next Page
Loading...
