From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library
LOCKING
OUT
CODES
This function is useful if you wish to inhibit the dual
bander from receiving specific Group Page codes.
Page Lockout does not inhibit the dual bander from
receiving stations calling your individual Station code.
Although the codes are locked out from the receiver,
the transmitter still transmits a Page
on
the locked out
codes.
1 Press [BAND] to select the Operating band.
2 Press
[F],
[PAG) to switch
ON
the Page function.
3 Press [F], [PAG CODE) to select Code Select.
4 Turn the ENC control to display a Page code.
5 Press
{F],
[L.OUl].
• This step toggles the selected Page code
between locked out and not locked out.
-
PAG
m P 1 •
·~·
·~·
·-:·
L
•.L.r:......:..
440.
(HZHJ
6 Press [CLR] to exit Code Select.
Note: You cannot lock
out
memory 0 that stores the calling station's
code.
AUTO
PAGE
CANCEL
After successfully paging another station, it is useful to
turn OFF Page to eliminate sending a Page code each
time you transmit. Auto Page Cancel handles this
situation automatically when a station that you called
responds using the correct Page code to open your
dual bander's squelch. On your next transmission, your
dual bander then switches OFF its Page function.
1 Press
[MENU].
2 Turn the ENC control to select "PAG Cancel" (7).
-
PAG
m
P!='il::i
Cance
1
f'i.;jt"IIJ.a 1 ?
3 Press
[SEl]
to toggle between "Manual" and "Auto".
• The default is "Manual".
4 Press [MENU] to exit.
53
To Next Page
Loading...
Need help?
General
