From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library
AUXILIARY
FUNCTIONS
BATIERY
SAVER
Battery Saver becomes active when the squelch
is
closed and no key is pressed for more than 10 seconds.
This function becomes passive whenever any key is
pressed or the squelch is opened. Once the squelch
closes and 10 seconds pass with no further key entries,
Battery Saver becomes active again.
Battery Saver does not function while scanning.
1 Press [MENU].
2 Turn the ENC control to select "Save"
(1
).
1
3 Press
[SEn
to toggle between "Off" and "On".
• The default is "On".
4 Press
[MENU] to exit.
AUTOMATIC
POWER
OFF
(APO)
After 1 hour elapses with no key entries, APO turns
OFF the power; however, 1 minute before the power
turns OFF, the APO indicator begins blinking and
an
audio tone sounds. When the power is turned OFF by
APO, the frequency disappears from the Display. If the
receiver squelch opens or any keys are pressed during
the 1 hour period while APO is ON, the timer resets.
When the squelch closes or key entry stops, the 1 hour
timer begins counting again from
0.
APO does not turn
OFF the power if Tone Alert is ON.
1 Press
[MENU].
2 Turn the ENC control to select "APO" (2).
3 Press
[SEn
to toggle between "Off" and "On".
• The default is "On".
4 Press [MENU] to exit.
To restore power after APO has activated, switch the
dual bander power OFF then
ON
again using the
PWRIVOL control.
43
To Next Page
Loading...
Need help?
General
