KTM 690 SMC User Manual

STORAGE 157
14STORAGE
14.1Storage
Info
If you want to garage the motorcycle for a longer period, take the following actions.
Before storing the motorcycle, check all parts for function and wear. If service, repairs or replacements are necessary, you should
do this during the storage period (less workshop overload). In this way, you can avoid long workshop waiting times at the start of the
new season.
– Make sure the tank is as empty as possible so that you can fill up with fresh fuel when you put the motorcycle back into operation.
– Clean the motorcycle. ( S. 154)
–
Change engine oil and oil filter, clean oil screens.x ( S. 140)
– Check the antifreeze and coolant level. ( S. 130)
– Checking the tire air pressure. ( S. 109)
–
Remove the battery.x ( S. 111)
–
Recharge the battery.x ( S. 112)
Guideline
Storage temperature of battery without direct sunshine. 0… 35°C (32… 95°F)
– The storage place should be dry and not subject to large temperature differences.
Info
KTM recommends jacking up the motorcycle.
– Jack up the rear of the motorcycle. ( S. 64)
– Jack up the front of the motorcycle. ( S. 63)

KTM 690 SMC Specifications

General

Bore x Stroke	105 mm x 80 mm
Starter	Electric starter
Transmission	6-speed
Lubrication	Forced oil lubrication with 2 oil pumps
Clutch	APTC slipper clutch, hydraulically actuated
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Tires Front	120/70 ZR 17
Tires Rear	160/60 ZR 17
Steering Head Angle	63.5°
Seat Height	890 mm
Engine Type	1-cylinder, 4-stroke engine
Fuel System	Electronic fuel injection
Cooling	Liquid cooled
Front Brake	Brembo four piston radial caliper, 320 mm disc
Rear Brake	Brembo single piston caliper, 240 mm disc
Wheels Front	3.50 x 17"
Wheels Rear	5.00 x 17"
Fuel Capacity	13.5 l
Power	55 kW (74 hp)
Wheelbase	1, 480 mm ± 15 mm