Kubota B1620 Workshop Manual

CLUTCH
B1220, B1620, B1820, WSM
2-S3
(EU)
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-11.)
9Y1210272CLS0003US0
Item N·m kgf·m lbf·ft
Steering wheel mounting nut 30 to 49 3.0 to 5.0 22 to 36
Slotted nut 18 to 35 1.9 to 3.5 14 to 25
Power steering delivery pipe nut (If equipped) 35 to 45 3.6 to 4.5 26 to 33
Clutch housing and engine mounting screw 18 to 20 1.8 to 2.1 13 to 15
Clutch mounting screw 24 to 27 2.4 to 2.8 18 to 20
KiSC issued 07, 2011 A

Kubota B1620 Specifications

General

Engine Type	Diesel
Cylinders	3
Fuel Type	Diesel
Hydraulic System Type	Open center
Drive	4WD
3-Point Hitch Category	Category I