Kubota B1620 Workshop Manual

GENERAL
B1220, B1620, B1820, WSM
G-7
(EU)
• Use sandpaper to remove rust from terminals.
• Repair deformed terminal. Make certain there is no terminal
being exposed or displaced.
WSM000001GEG0075US1
• Make certain that there is no female connector being too open.
WSM000001GEG0076US1
• Make certain plastic cover is large enough to cover whole
connector.
WSM000001GEG0077US1
[5] HANDLING OF CIRCUIT TESTER
• Use tester correctly following manual provided with tester.
• Check for polarity and range.
WSM000001GEG0078US1
(1) Exposed Terminal
(2) Deformed Terminal
(3) Sandpaper
(4) Rust
(A) Correct (B) Incorrect
(1) Cover (A) Correct
(B) Incorrect
KiSC issued 07, 2011 A

Kubota B1620 Specifications

General

Engine Type	Diesel
Cylinders	3
Fuel Type	Diesel
Hydraulic System Type	Open center
Drive	4WD
3-Point Hitch Category	Category I