GENERAL
B1220, B1620, B1820, WSM
G-17
(EU)
7. CHECK AND MAINTENANCE
• Be sure to check and service the tractor on a flat place with engine shut off, the parking brake on and
chock the wheels.
9Y1210272GEG0063US0
[1] DAILY CHECK
To prevent trouble from occurring, it is important to know the condition of the tractor. Check the following items
before starting.
Checking
• Check areas where previous trouble was experienced.
• Walk around the tractor.
1. Check the tire pressure, and check for wear and damage.
2. Check for oil and water leaks.
3. Check the engine oil level.
4. Check the transmission fluid level.
5. Check the coolant level.
6. Check the condition of seat belt and ROPS attaching hardware.
7. Check and clean the radiator screen and grille.
8. Check the bolts and nuts of the tires are tight.
9. Check the number plate or SMV emblem for damage and cleaner replace as necessary if equipped.
10. Care of danger, warning and caution labels.
11. Clean around the exhaust manifold and the muffler of the engine
• While sitting in the operator's seat
1. Check the brake pedals and clutch pedal.
2. Check the parking brake.
3. Check the steering wheel
• Turning the key switch.
1. Check the performance of the Easy Checkerâ„¢ lights.
2. Check the head lights, tail lights and hazard lights. Clean if necessary.
3. Check the performance of the meters and gauges.
• Starting the engine.
1. Check to see that the lights on the Easy Checkerâ„¢ go off.
2. Check the color of the exhaust gas.
3. Check the brakes for proper operation.
9Y1210272GEG0007US0
To Next Page
General
