KYMCO PEOPLE 250 Service Manual

13. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
13-7
PEOPL E 25 0
CARBURETOR REMOVAL
Remove the met-in box.
Disconnect the fuel tube at the carburetor.
Disconnect the auto bystarter wire.
Disconnect the throttle position sensor wire.
Disconnect the heater carburetion wire
coupler
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
Loosen the air cleaner connecting tube band
and carburetor intake manifold band and then
remove the carburetor.
VACUUM CHAMBER
DISASSEMBLY
Loosen the drain screw and drain the fuel
from the float chamber.
Auto Bystarter Wire
Auto Bystarter
Fuel Tube
Intake Manifold Band
Air Cleaner Connecting
Tube Band
Drain Screw
Throttle Cable
T.P.S
T.P.S Wire
Heater Carburetion
Wire Coupler

KYMCO PEOPLE 250 Specifications

General

Displacement	249 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Front Tire	110/70-16
Rear Tire	140/70-16
Transmission	CVT
Seat Height	800 mm
Width	780 mm