KYMCO PEOPLE 250 Service Manual

6. CYLINDER HEAD/VALVES
6-7
PEOPL E 25 0
Remove the dowel pins and cylinder head
gasket.
Remove the cam chain guide.
Remove all gasket material from the cylinder
head mating surface.
CYLINDER HEAD DISASSEMBLY
Remove the valve spring cotters, retainers,
springs, spring seats and valve stem seals
using a valve spring compressor.
Valve spring compressor E040
Remove carbon deposits from the exhaust
port and combustion chamber.
Valve Spring Compressor
Cam Chain Guide
Cylinder Head
Combustion Chamber
Cylinder
Cylinder Head Gasket
Dowel Pins
• Be sure to compress the valve
springs with a valve spring compressor.
• Mark all disassembled parts to
ensure correct reassembly.
＊
Be careful not to drop any gasket
material into the engine.
＊
Be careful not to damage the cylinder
head mating surface.
＊
Special

KYMCO PEOPLE 250 Specifications

General

Displacement	249 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Front Tire	110/70-16
Rear Tire	140/70-16
Transmission	CVT
Seat Height	800 mm
Width	780 mm