KYMCO PEOPLE 250 Service Manual

19. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS
19-7
PEOPL E 25 0
THROTTLE POSTTION SENSOR
Unit:KW
V/R
V/G
V/B
V/R
4~6
∞
V/G
4~6
0~5±1
V/B
∞
0~5±1
INSTRUMENTS
REMOVAL
Remove the handlebar rear cover. (
!
2-4)
Remove the three screws under instruments.
Remove the instruments from the handlebar
rear cover.
INSTALLATION
The installation sequence is the reverse of
removal.
FRONT TURN SIGNAL LIGHT BULB
REPLACEMENT
Remove the two screws attaching the turn
signal light shell and remove the screw
attaching bulb shell.
Remove the bulb and replace with a new one.
REAR TURN SIGNAL LIGHT BULB
REPLACEMENT
Remove the one screw attaching the turn
signal light shell and remove the screw bulb
shell.
Remove the bulb and replace with a new one.
Screws
T.P.S.
Screws
Screw
Screw
Screw

KYMCO PEOPLE 250 Specifications

General

Displacement	249 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Front Tire	110/70-16
Rear Tire	140/70-16
Transmission	CVT
Seat Height	800 mm
Width	780 mm