KYMCO PEOPLE 250 Service Manual

14.STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
14-14
PEOPL E 25 0
FRONT SHOCK ABSORBER
REMOVAL
Remove the front cover. (
!
2-5)
Remove the front fender cover A and B. (
!
2-
5)
Remove the front wheel. (
!
14-5)
Remove the front brake caliper. (
!
14-11)
Remove the front shock absorber upper
mount bolts.
Loosen the lower mount bolts to remove the
front shock absorbers.
INSTALLATION
Install the front shock absorbers onto the
front fork.
Install and tighten the front shock absorber
upper mount bolts.
Tighten the lower mount bolts.
Torque: 29_ 35N-m
Install the front wheel. (
!
14-7)
Upper Mount Bolts
Front Fork
Front Shock Absorber
Align the upper mount bolt hole with
the groove on the front fork.
＊
Lower Mount Bolts

KYMCO PEOPLE 250 Specifications

General

Displacement	249 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Front Tire	110/70-16
Rear Tire	140/70-16
Transmission	CVT
Seat Height	800 mm
Width	780 mm