KYMCO PEOPLE 250 Service Manual

7. CYLINDER/PISTON
7-3
PEOPL E 25 0
CYLINDER REMOVAL
Remove the cylinder head. (
!
chapter 6)
Remove the dowel pins and cylinder head
gasket.
Remove the water hose from the cylinder.
Remove the cam chain guide.
Remove the cylinder.
Remove the cylinder gasket and dowel pins.
Clean any gasket material from the cylinder
surface.
PISTON REMOVAL
Remove the piston pin clip.
Press the piston pin out of the piston.
Water Hose
Dowel Pins
Cam Chain Guide
Gasket
Shop Towel
Cylinder
Piston Pin
Piston
Piston Rings
Place a clean shop towel in the crankcase
to keep the piston pin clip from falling
into the crankcase.
＊
Dowel Pins
Cylinder Head Gasket

KYMCO PEOPLE 250 Specifications

General

Displacement	249 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Front Tire	110/70-16
Rear Tire	140/70-16
Transmission	CVT
Seat Height	800 mm
Width	780 mm