Manitowoc Grove GMK6300L-1 Maintenance Manual

Maintenance work on the carrier
7.6 Transmission
13.02.2018
Maintenance manual 3 302 719 en 7 - 41
GMK6300L-1
7.6.2 General inspection
• Pay attention to any unusual running noises from the transmission.
• Check the transmission and the connections for leaks. If consumables are
leaking;
à Checking the oil level, p. 7 - 37.
• Check that pipes and hoses are tightly connected and undamaged.
If any damage is found, report it to
Manitowoc Crane Care or an authorised
GROVE dealer or an authorised specialist workshop.
7.6.3 Changing the oil and oil filter
Oil, spare parts
and tools
– Receptacle, approx. 50 ltr (13 gal);
à p. 2 - 4.
– Torque wrench for a torque of 25-32 Nm (18-24 lbf ft) and 50-60 Nm
(37-44 lbf ft).
Pre
requisites – The gear oil must be at operating temperature (75 to 95 °C (160 to 200 °F)).
– The truck crane must be raised on outriggers or parked over an
inspection pit.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
s
W
Y 2
Gear oil in litres
(gal)
Specification
Classification
GROVE part no.
46 (12.2) TranSynd TES295; synthetic oil;
do not mix with min
eral oil.
6829101690
Designation Quantity GROVE part no.
Oil filter set with gaskets
(contains two filters and one oil drain
plug ga
ske
t)
1
03141323

Manitowoc Grove GMK6300L-1 Specifications

General

Brand	Manitowoc
Model	Grove GMK6300L-1
Category	Construction Equipment
Language	English