Maintenance work on the superstructure
8.9 Hydraulic system
13.02.2018
Maintenance manual 3 302 719 en 8 - 73
GMK6300L-1
8.9.9 Changing the hydraulic oil filter
All oil filters must be replaced when changing the oil.
In the event of a warning message, the red symbo
ls in the Warning
submenu indicate which oil filters you have to change.
Spare parts
and t
ools
– Torque wrench for 60 Nm (44 lbf ft).
– Receptacle, approx. 10 ltr (3 gal);
à p. 2 - 4.
Prerequisites – The truck crane must be level and in on-road mode;
à Manual de
instrucciones
.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
s
1 Red – Changing oil filter 2
2 Red – Changing oil filter 1
Designation Quantity GROVE part no.
For oil filter 1:
Filter 1 03325700
Packing set 1 03135853
For oil filter 2:
Filter 1 03142356
Housing packing set 1 03326049
For oil filter 3:
Filter 1 03249527
O
Risk of damage to the environment from filter residues
Store used hydraulic oil filter inserts in suitable receptacles and have them
disposed of properly by qualified personnel.