Manitowoc Grove GMK6300L-1 Maintenance Manual

Maintenance work on the carrier
7.19 Other maintenance work
13.02.2018
Maintenance manual 3 302 719 en 7 - 125
GMK6300L-1
7.19.3 Checking the functioning of the auxiliary heater
Depending on the equipment, your truck crane has been fitted with an
auxiliary heater.
Even during the warm summer months, run the auxiliary heater for 20 to
30 min
utes;
à Manual de instrucciones.
• Check that the system is working properly. Also perform a functional
check of the controls.
• If the heating system is not working correctly, report it to
Manitowoc Crane Care or an authorised GROVE dealer or an
authorised specialist workshop.
7.19.4 Lubricating the cab door
Grease, tools
– Grease gun from the tool set.
Lubricating
• Open the doors on the driver and passenger
side.
• Clean the grease nipples (1) on the door
hinges.
• Press grease into the grease nipples.
• Close and open the doors several times –
the doors should move easily.
• Remove any grease that emerges.
• In case the doors are stiff or do not close properly after lubrication, have
them adjusted by
Manitowoc Crane Care or by an authorised GROVE dealer.
M 1
M 12
Lubricating
grease
Designation
according to
DIN 51502
Specification
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369

Manitowoc Grove GMK6300L-1 Specifications

General

Brand	Manitowoc
Model	Grove GMK6300L-1
Category	Construction Equipment
Language	English