Manitowoc Grove GMK6300L-1 Maintenance Manual

Maintenance work on the superstructure
8.11 Hoist ropes
8 - 98 3 302 719 en Maintenance manual
GMK6300L-1
13.02.2018
8.11.5 Replacing the hoist rope
Spare parts
and tools
– An authentic replacement rope; à Rope certificate.
– A reel stand with braking block.
– Torque wrench for 78 Nm (57.5 lbf ft).
Prerequisites – The truck crane must be level.
– The main boom is set down on the boom rest.
– The hook block must be unreeved;
à Manual de instrucciones.
Replacing the
old r
ope
• Unreel the hoist rope until it switches off.
• Adjust the lowering limit switch so that you can unreel the
rope completely;
à Setting the lowering limit switch, p. 8 - 101.
• Unreel the remaining layers from the hoist drum.
• Protect the truck crane from unauthorised use; à p. 2 - 3.
S
Risk of accidents from falling load.
Use only a replacement rope that has the same technical specifications
as the defective rope, or an authentic replacement rope.
G
Risk of accidents due to the rotating rope drum
Switch the engine off and remove the ignition key so that no unauthorised
operation of the hoist can occur.

Manitowoc Grove GMK6300L-1 Specifications

General

Brand	Manitowoc
Model	Grove GMK6300L-1
Category	Construction Equipment
Language	English