Maintenance work on the superstructure
8.10 Main boom
8 - 86 3 302 719 en Maintenance manual
GMK6300L-1
13.02.2018
Before driving the truck crane
Fully retracting all telescopic sections of the main boom after greasing
may result in excess lubricant paste emerging at the collar (1).
• Remove any excess lubricant paste from the collar (1).
This is to prevent any lumps dropping off on to the windscreen
and suddenly obstructing the view when driving.
8.10.3 Checking the sheaves
• Check all the sheaves (1) to (4) on the main
boom head and on the bracket for damage,
wear, mobility and for excessive dirt.
Have damaged, worn, stiff or extremely soiled sheaves replaced by
Manitowoc Crane Care or an authorised GROVE dealer or your repair crew.
To Next Page
Loading...
Need help?
General
