viii
Safety Precautions
Pictorial signs
Pictorial signs are used in this Operation manual for safe operation and for prevention of damage to the plotter.
Pictorial signs and their meanings are given below. Read and fully understand before reading the text.
Example of pictorial signs
Warning for Use
Failure to observe the instructions given with this symbol can result in death or serious injuries
to personnel. Be sure to read and observe the instructions for proper operation.
Failure to observe the instructions given with this symbol can result in injuries to personnel or
damage to property.
This symbol indicates that the information is helpful in proper operation of the plotter.
This symbol indicates that it is important to know of the information on proper operation of the
plotter. Use this information for your operation.
Indicates the reference page for related contents.
The symbol “ “indicates that the instructions must be observed as strictly as the CAUTION
instructions (including DANGER and WARNING instructions). A sign representing a precaution
(the sign shown at left warns of hazardous voltage) is shown in the triangle.
The symbol “ “indicates that the action shown is prohibited. A sign representing a prohibited
action (the sign shown at left prohibits disassembly) is shown in or around the circle.
The symbol “ “ indicates that the action shown must be taken without fail or the instructions
must be observed without fail. A sign representing a particular instruction (the sign shown at left
instructs to unplug the cable from the wall outlet) is shown in the circle.
WARNING
Do not disassemble or remodel the plotter Avoid locating the plotter in a damp environment
• Never disassemble or remodel the plotter.
Disassembly or remodeling can result in an
electric shock or breakdown of the machine.
• Do not use the plotter in a damp place. Do not
splash water onto the machine. Use in such an
environment can give rise to fire, electric shocks
or breakdown of the plotter.
In case abnormal event occurs Handling of the power cable
• Use of the plotter under an abnormal condition where
the device produces smoke or strange smell can
result in fire or electric shocks. If such an abnormality
is found, be sure to turn off the power switch
immediately and unplug the cable from the wall outlet.
Check first that the plotter no longer produces smoke,
and contact your distributor for repair. Never repair
your plotter by yourself since it is very dangerous for
you to do so.
• Use the supplied power cable.
• Take care not to damage, break or work upon
the power cable. If a heavy material is placed on
the power cable, or if it is heated or pulled, the
power cable can break, thus resulting in fire or
electric shocks.
To Next Page
Loading...
Need help?
General
