Comments (Annotations)
14-4
6 Once you find the desired comment text, press [Set] or [Enter] to confirm the
comment text and exit the comment status. The added comment text turns to yellow
color.
14.3.3 Adding an Arrow
You can add an arrow to a location where you want to pay attention.
1 Press the [Arrow] key, and an arrow will appear in the default position. You can move the
arrow, change the orientation of the arrow, or delete the arrow.
2 To position the arrow to the area of interest:
Roll the trackball to the desired position.
3 To change the orientation of the arrow:
Rotate the [Multifunction] knob to change the arrow orientation (in 15° increments).
4 Use the soft menu control to click the [Arrow Size] item of the soft menu to change
the size of the arrow: Small, Middle or Large.
5 Press [Set] or [Enter] to anchor the Arrow position, and the arrow turns to yellow
color.
6 Repeat the above steps to add more arrows.
7 Press [Arrow] to exit the arrow-adding status.
14.4 Moving Comments
1
Move the cursor onto the comment that needs to be moved. Press the [Set] key to select
it, and at this time a highlighted box appears around the comment.
2
Roll the trackball to move the comment to the new position.
3
Press the [Set] key to anchor the comment in the new position, and the
comment-moving operation is complete.
14.5 Modifying (Editing) Comments
14.5.1 Modifying (Editing) Characters
1
Move the cursor on the comment that needs to be modified, and press the [Set] key to
select it.
2
Press the [Set] key again to enter the edit status.
3
Use the or key to move the cursor to a location where needs to insert
characters, and type characters or select the new comment text from the comment text
library menu.
4
Press the [Del] key to delete the comment character or text on the right side of the
cursor.
To Next Page
Loading...
Need help?
General
