Parameter Setup
17-11
17.11.2 Importing Setup Data
This function is used to import the existing setup data to the setup data memory of the
system. The system will reset and operate according to the setup preferences that were
imported.
The procedures are described as follows:
1 Select an item in the [Import] field on the right side of the [Manage Settings] screen.
2 Click [Import] to open the [Import Data] screen.
3 Select the path to save the data.
4 Select the imported file and type as DTA.
5 Click [OK].
6 To restore the factory setup data, click [Restore Factory] on the right side of the
screen.
You can use [Export], [Import All], or [Restore Factory] at the bottom of the screen to
export, import all setup data of the system or restore all factory setup data of the system.
The operating methods are the same as those mentioned above.
17.12 Maintenance
The [Maintenance] item is designed for you to update the system software or other
special functions. If you require these functions, please contact Mindray Customer
Service Department or sales representative.
Through the menu, you can perform net update, remote desktop, system test, log
operation, etc.
17.13 System Information
Select the [About] item in the Setup menu to enter the system information screen, which
displays the system software version and versions of other devices. You cannot edit the
information but can only view them. This information varies depending upon the system
configurations and version.
To export the system information, click [Save] in the [System Information] page, specify
the file name and file path, you can save the information to a txt file.
To Next Page
Loading...
Need help?
General
