17-1
17 Parameter Setup
The Setup function is designed to set the configuration parameters of operating the system
and maintain user workflow preferences. User and system setups are stored to the hard drive,
and should be backed up to CD or USB memory devices.
CAUTION:
When the setup data is changed, be sure to save the
preferences according to the methods described in this
chapter. Mindray is not responsible for the loss of the setup
data.
17.1 Entering / Exiting Setup
To enter the setup status:
1. Press the [Setup] key on the control panel; or
2. Move the cursor onto the menu title (of image menu, ECG menu or biopsy menu), other
selections pop up, navigate the cursor to the “Other” item and press [Set]. Select [Setup]
in the [Other] menu to enter the [Setup] menu.
To exit the setup status:
Selecting [Return] on the menu will close the Setup menu, and save your changes.
To Next Page
Loading...
Need help?
General
