Mitsubishi FX3U-16CCL-M User Manual

13 Example of Communication between Master Station
13.2 When Remote Net Ver. 2 Mode is Used
162
FX3U-16CCL-M User's Manual
13.2.6 Execution of data link
Turn on the power of the remote device stations first, turn on the power of the master station, then start the
data link.
13.2.7 Confirmation of operation by LED indication
The figures below show the LED indication status in the master station and the remote device stations while
the data link is normally proceeding.
• LED indication in the master station
Make sure that the LED indication status is as shown below.
• LED indication in the remote device station
Make sure that the LED indication status is as shown below.
-FX
2N-32CCL
The unit is normal.
Data link is normally proceeding.
Data is being transmitted.
Data is being received.
: On
: Of
f
5 V DC is supplied from the PLC.
Data link is normally proceeding.
Data is being transmitted.
Data is being received.
: On
: Of
f

Mitsubishi FX3U-16CCL-M Specifications

General

Brand	Mitsubishi
Model	FX3U-16CCL-M
Category	Controller
Language	English