8 - 46
8. DEBUGGING FUNCTION
(c) Setting the execution operation
Set the scan time, interrupt status, and refresh, at "3. Option" on "Partial Run"
screen.
*Multiple setting can be made.
The following shows all settings.
Item Description
Scan time
Designates whether QnACPU executes the scan time by the actual time or by
the designated time. (Default: designated time 10ms)
Interrupt status
Designates whether or not interrupts are prohibited during execution.
(Default: "Inhibit")
Refresh
Designates whether QnACPU executes I/O refresh whenever program
execution is stopped due to satisfaction of a condition, or executes only at END
processing.
(Default: "Successively")
To Next Page
Loading...
Need help?
General
