2.
2 - 5
OVERVIEW
2.2 Additional Functions of QnACPU
New functions and instructions for special function module are added to the QnACPU.
[Additional functions]
[Added instructions for special function module]
The following instructions have been added for function version "B'' of the QnACPU:
Additional function/special function module instructions can be used for the QnACPU
described function version B in the date column of the rating plate.
Check that function version B is described on the QnACPU rating plate before using the
additional function/special function module instructions.
If your QnACPU does not have indication of function version B, skip this item and the
description of additional functions.
When using additional function/special function module instructions of the QnACPU, it is
necessary to match the GPP function model and the function version/version of the
applicable special function module. (Refer to Table 2.1.)
Variety of local devices.................................................. Refer to Section 2.2.1 (1).
Monitor test of local device.................................. Refer to Section 8.2.2.
Use of local device at the subroutine/interrupt
program storage destination................................. Refer to Appendix 7.
Auto refresh setting of CC-Link...................................... Refer to Section 2.2.1 (2),
Section 7.2.
MELSECNET/10 relay communication from the
Ethernet module (Network relay).................................... Refer to Section 2.2.1 (3),
Appendix 8.
Addition of AJ71QC24N-compatible commands ............Section 2.2.1 (4)
AJ61QBT11 control instructions...................................... 13
AD75 control instructions................................................ 19
AJ71D -R4 control instructions.....................................
12
AJ71QE71 control instructions........................................ 10
To Next Page
Loading...
Need help?
General
