Mitsubishi Q2ACPU User Manual

3.
3 - 21
SYSTEM CONFIGURATION
3.3.2 Precautions when configuring the system
The following shows the hardware and software packages which can be used for
QnACPU.
(1) Hardware
(a) The number of modules that can be mounted is restricted depending on the
module type.
REMARK
The modules described above are categorized as follows.
Applicable Module Dedicated to QnACPU For ACPU Remark
I/O module
– No restrictions –
Special function module No restrictions No restrictions –
Intelligent special
function module
No restrictions Total 6 modules
Including GOT-A900
Series
(Only when the bus
connection is used.),
and GOT1000 Series
(Only when the bus
connection is used.)
Interrupt module
– Only 1 module –
Link module
Ethernet module
Total 4 for network,
Ethernet use
Total 2 for data link use
Total 4 for network,
Ethernet and data link
use
1) I/O module............................... Standard input modules and output modules
2) Special function module.......... Special function modules that perform processing
in accordance with FROM/TO instructions from the
QnACPU (for example: A68AD, A62DA, etc.)
3) Intelligent special function......
module
Special function modules that can process not only
by executing FROM/TO instruction of QnACPU but
also by accessing QnACPU from special function
module (Example: AJ71UC24, AJ71QC24N, etc.)
4) Interrupt module...................... Modules that issue interrupts to the QnACPU
(AI61)
5) Link module............................. Special function modules for MELSECNET II, /B
data links and MELSECNET/10 networks.
(Example: AJ71AP21, AJ71QLP21, etc.)
6) Ethernet module...................... Dedicated Ethernet interface modules for
QnACPU (AJ71QE71, AJ71QE71-B5)

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English