1.
1 - 2
ABOUT THIS MANUAL
1.2 Abbreviations and Generic Terms Used in this Manual
The following abbreviations and generic terms are used in this manual.
(1) QnACPU................................... Abbreviation for Q2ACPU, Q2ACPU-S1,
Q3ACPU, and Q4ACPU type CPU modules.
(2) Network module......................... Abbreviation of AJ71QLP21(G), AJ71QLP21S,
AJ71QLR21, AJ72QLP25 (G), AJ71QBR11,
AJ72QBR15 and AJ72QLR25 type
MELSECNET/10 network modules.
(3) Ethernet module......................... Abbreviation of AJ71QE71N-B2 and
AJ71QE71N-B5T type Ethernet interface
modules.
(4) Serial communication module.... Abbreviation of AJ71QC24 (N), AJ71QC24 (N)-
R2 type serial communication module.
(5) CC-Link..................................... Abbreviation of Control & Communication Link
(6) GPP function.............................
Abbreviations for the SW IVD-GPPQ type
GPP function software package, GX Developer.
(7) Personal computer..................... IBM's PC/AT or completely compatible
computers.
(8) Peripheral device capable .........
of GPP functions
Generic term for a peripheral device capable of
running the GPP function software, for example
an IBM PC/AT.
(9) Q6PU......................................... Abbreviation for Q6PU programming unit.
(10) Peripheral device........................ Generic term for a device that is connected to a
QnACPU and can be used to operate it, for
example a IBM-PC/AT-compatible personal
computer or Q6PU.
(11) Built-in RAM............................... A RAM incorporated in the QnA CPU that stores
sequence programs and other data.
(12) Memory card..............................
Abbreviation for Q1MEM- type memory
card
(13) ACPU......................................... Generic term for a MELSEC-A series
programmable controller
To Next Page
Loading...
Need help?
General
