17.
17 - 11
BASE UNIT AND EXTENSION CABLE
17.6 Setting of Extension Stage Numbers
This section explains how to set the extension stage number for each of the extension
base units used.
Extension base unit stage number setting
Extension Stage Number Setting
1st Stage 2nd Stage 3rd Stage 4th Stage 5th Stage 6th Stage 7th Stage
Setting of the
stage number
setting connector
POINT
With the stage number setting connector (CON3), select one of the 1st to 7th that
matches the extension stage number. Multiple settings for the same stage,
duplicate stage setting, or no setting is not allowed because it may result in
erroneous inputs and/or outputs.
To Next Page
Loading...
Need help?
General
