16.
16 - 1
POWER SUPPLY MODULE
16 POWER SUPPLY MODULE
This section describes the specifications and selection of power supply modules.
16.1 Specifications
16.1.1 Power supply module specifications
(1) Standard power supply module
Power supply module specifications
Item
Specifications
A61P A61PN A62P A63P A65P A66P A67P
Slot position Power supply module slot I/O module slot
Power supply
module slot
Input power supply
100VAC to 120VAC
(85VAC to 132VAC)
24VDC
(15.6VDC to
31.2VDC)
100VAC to 120VAC
(85VAC to 132VAC)
110VDC
(85VDC to
140VDC)
200VAC to 240VAC
(170VAC to 264VAC)
200VAC to 240VAC
(170VAC to 264VAC)
Input frequency
50/60Hz 5%
–
50/60Hz 5%
–
Input voltage distortion Within 5% (See Section 19.8) – Within 5% (See Section 19.8) –
Max. input apparent power 160VA 155VA 65W 110VA 95VA 65W
Inrush current
20A, 8ms or less
*4
100A, 1ms or
less
20A, 8ms or less
*4
20A, 8ms or
less
Rated
output
current
5VDC 8A 5A 8A 2A – 8A
24VDC – 0.8A – 1.5A 1.2A –
Overcurrent
protection
*1
5VDC 8.8A or higher 5.5A or higher 8.5A or higher 2.2A or higher – 8.5A or higher
24VDC – 1.2A or higher – 2.3A or higher 1.7A or higher –
Overvoltage
protection
*2
5VDC 5.5 to 6.5V 5.5 to 6.5V 5.5 to 6.5V 5.5 to 6.5V – 5.5 to 6.5V
24VDC –
Efficiency 65% or higher
Dielectric withstand
voltage
Between AC external terminals and ground, 1500V AC, 1 minute
Between DC external terminals and ground, 500V AC, 1 minute
Noise durability
Checked by noise simulator of noise voltage
1500Vp-p, noise width 1 s, and noise frequency 25
to 60Hz
Checked by
noise simulator
of noise voltage
500Vp-p, noise
width 1 s, and
noise frequency
25 to 60Hz
Checked by noise simulator of noise voltage
1500Vp-p, noise width 1 s, and noise frequency 25
to 60Hz
Insulation resistance
Between AC external terminals and ground, 5M or higher by 500VDC insulation resistance tester
Power indicator LED indication of power supply
Terminal screw size
M4 0.7 6 M3 0.5 6 M4 0.7 6
+10%
-15%
+30%
-35%
+10%
-15%
+10%
-15%
+10%
-15%
To Next Page
Loading...
Need help?
General
