21.
21 - 12
MAINTENANCE AND INSPECTION
21.4 Fuse Replacement
Even if a fuse has not blown, the element may have deteriorated due to inrush current,
and the fuse should therefore be changed at regular intervals.
21.4.1 Replacement of the fuse for a power supply module
The procedure for replacing the fuse is as follows.
CAUTION
When replacing the fuse, use a fuse specified by the manufacturer.
Using the one for the high-rated current or an electric wire may cause a fire.
Refer to Section 22.2.2 "Flow
for actions when thePOWER
LED is turned off".
To Next Page
Loading...
Need help?
General
