8.
8 - 61
DEBUGGING FUNCTION
8.10 Debugging by Several People
This function allows simultaneous debugging from several peripheral devices capable of
GPP functions.
This function is used to simultaneously debug different files from more than one peripheral
device capable of GPP functions.
The following shows the combinations of debugging functions that can be used
simultaneously by different operators.
Debug function from
host
Debug function from other stations
Monitor
Write during
RUN
Execution Time
Measurement
Sampling Trace
/Program Trace
Status Latch
Step
Operation
Simulation
Monitor
Write during RUN
Execution time
measurement
Sampling trace
Program trace
Status latch
Step operation
Simulation
:
Simultaneous execution possible. (However, the detailed condition setting at
only one peripheral device capable of GPP functions is valid; detailed
conditions cannot be set at the other peripheral devices capable of GPP
functions.)
: Can only be executed from one peripheral device capable of GPP functions.
Application
Function Description
To Next Page
Loading...
Need help?
General
