Mitsubishi Q2ACPU User Manual

2 - 8
2. OVERVIEW
(3) Netwotk relay from Ethernet module
(a) In the network system with mixture of Ethernet and MELSECNET/10, data can
be communicated with the QnACPU of other stations via multiple Ethernets or
MELSECNET/10 modules.
(b) For the network relay from the Ethernet module, the function version of the
Ethernet module should be upgraded to "B" or later.
(4) AJ71QC24N-compatible commands are possible.
(a) The following AJ71QC24N commands are available:
• Multiple blocks batch read: Command "0406"
• Multiple blocks batch write: Command "1406"
(b) Multiple blocks batch read/batch write is available with AJ71QC24N (-R2, R4).
Multiple blocks batch read/batch write is not available with AJ71QC24 (-R2, R4).
For commands of multiple blocks batch read/batch write, refer to the following
manual:
• Corresponding Additional Explanation for AJ71QC24N (-R2/R4)

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English