Oki MB770dn User Manual

2
1
3
4
5
6
7
SENDING A N/W FAX
- 141 -
● SENDING A N/W FAX
Basic Procedure
The basic procedure for sending a fax (Network Fax / Internet
Fax) is as follows.
You can use standard functions or set optional functions as
well as the basic ones described in this section. For these
operations, see the following section.
 P.148 "SETTING N/W-Fax DRIVER"
1
Start the application software and prepare
the document to be sent.
2
Select [Print] from the [File] menu in the
application software.
Memo
• The procedure for displaying the print dialog box may
differ from the above depending on the application
software.
3
Select [OKI MB770(FAX)] for the machine
and click [Preferences].
The dialog box of the N/W-Fax driver properties appears.
Memo
• Note that the command name to open the driver
properties may differ from [Preferences] depending on
the application software.
4
Click the [Send] tab and specify the
recipients.
• To specify recipients, enter them with the keyboard or
select them from the address book.
 P.143 "Specifying Recipients"
• On the [Send] tab, you can set the resolution of a fax
cover sheet, etc. as well as specifying the recipients.
 P.149 "Setting up the [Send] tab"
• On the [Layout] tab, you can set the size and the
orientation of the paper.
 P.148 "Setting up the [Layout] tab"
• On the [Cover Sheet] and [Sender Information
Properties] tab, the sender information for adding a fax
cover sheet can be set.
 P.150 "Setting up the Cover Sheet"
 P.151 "Setting up the SNMP"

Oki MB770dn Specifications

General

Brand	Oki
Model	MB770dn
Category	All in One Printer
Language	English