EDITING FUNCTIONS
- 81 -
4
Adjust the width of the part to be erased.
1) Press either [ 2 mm] (0.08") or [ 50 mm]
(1.97").
2) Press [OK].
5
Select other copy modes as required, and
then press the [START] button on the
control panel.
2IN1 / 4IN1
You can copy 2 or 4 originals to 1 sheet of paper by shrinking
them. This function is called “2IN1” or “4IN1”. If you use this
function together with duplex copying, you can make a total of
8 images on 1 sheet of paper.
The illustrations below show how you can arrange the images.
2IN1
4IN1
2IN1 & duplex copying (a: side 1, b: side 2)
4IN1 & duplex copying (a: side 1, b: side 2)
1
Place paper in the tray(s).
When using bypass copying, be sure to set the paper
size.
Memo
• If you select paper of a different size to that of the
original, press [ZOOM] on the BASIC menu. Next
select the desired paper size, press [AMS] and then
[OK] in the menu shown below.
2
Place the original(s).
3
Press [2IN1 / 4IN1] on the EDIT menu.
4
Perform 2IN1 / 4IN1 setting.
1) If you want to copy 2 originals on 1 page, select
[2IN1]. If you want 4 on 1 page, select [4IN1].
2) Select the duplex mode.
3) Press [OK].
a
a
b
b
a
b
To Next Page
Loading...
Need help?
General
