EasyManuals Logo
Home>Oki>All in One Printer>MB770dn

Oki MB770dn User Manual

Oki MB770dn
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #251 background imageLoading...
Page #251 background image
SETTING ITEMS (ADMIN)
- 251 -
2
1
3
4
5
6
7
Setting the TCP/IP protocol (IPv6)
You can set the TCP/IP v6 protocol.
In IPv6 setting operation, you can enable or disable the IPv6
protocol in this equipment, as well as set the IPv6 address, for
example, by selecting the addressing mode.
How the IPv6 address is acquired depends on the addressing
mode you select.
When you select [MANUAL]:
You assign the IPv6 address, prefix and default gateway
manually. In this mode, it is possible to register one IPv6
address.
P.251 "Setting the IPv6 protocol manually"
When you select [STATELESS]:
The IPv6 address is acquired automatically from the
DHCPv6 server and routers. In this mode, it is possible to
register up to nine IPv6 addresses.
P.252 "Setting the IPv6 protocol automatically (in a
stateless network environment)"
Memo
Up to seven IPv6 addresses can be acquired from
routers. One IPv6 address can be obtained from the
DHCPv6 server. And, one link-local address is
generated automatically.
When you select [STATEFUL]:
The IPv6 address is automatically acquired from the
DHCPv6 server. In this mode, it is possible to register one
IPv6 address.
P.254 "Setting the IPv6 protocol automatically (in a
stateful network environment)"
Memo
If Duplicate Address Detection (DAD) detects duplicate
addresses, the message “IPv6 ADDRESS CONFLICT”
is displayed on the touch panel.
Setting the IPv6 protocol manually
1
On the IPv6 screen, specify the following
items as required and press .
Note
The link-local address cannot be used to connect to
network places across a router.
[ENABLE] and [DISABLE] for the LLMNR protocol are
available when you select [ENABLE] for the IPv6
protocol.
Item name Description
IPv6 PROTOCOL ENABLE — Press this button
to enable the IPv6 protocol.
DISABLE — Press this button
to disable the IPv6 protocol.
LLMNR ENABLE — Press [ENABLE]
to enable the LLMNR
(Linklocal Multicast Name
Resolution) protocol.
DISABLE — Press [DISABLE]
to disable the LLMNR protocol.
ADDRESS MODE Select [MANUAL] for the IPv6
addressing mode.
Link Local
Address
The unique address used in IPv6
is displayed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MB770dn and is the answer not in the manual?

Oki MB770dn Specifications

General IconGeneral
BrandOki
ModelMB770dn
CategoryAll in One Printer
LanguageEnglish

Related product manuals