Oki MB770dn User Manual

SETTING ITEMS (ADMIN)
- 249 -
2
1
3
4
5
6
7
2
Make the adjustment by following the
onscreen guidance.
Setting the Scan Adjustment
If the images scanned from the RADF (Reversing Automatic
Document Feeder) are distorted, you can lower the scanning
speed to reduce the distortion.
Setting the pop-up messages
You can set whether or not to display a message asking the
user if he or she wants to continue copying or printing after
clearing a paper misfeed.
Press [ENABLE] or [DISABLE] for each option and press [OK].
NETWORK
You can set various network functions.
Memo
• For instructions on how to display the NETWORK menu,
see the following page:
 P.232 "Accessing the Admin Menu"
 P.250 "Setting the TCP/IP protocol (IPv4)"
 P.251 "Setting the TCP/IP protocol (IPv6)"
 P.255 "Setting the IPX/SPX protocol"
 P.255 "Setting the NetWare settings"
 P.256 "Setting the SMB protocol"
 P.257 "Setting the AppleTalk protocol"
 P.257 "Setting the HTTP network service"
 P.258 "Setting the Ethernet speed"
 P.258 "Setting the LDAP services and the filtering
functions"
 P.258 "Setting IPsec (IP security)"
 P.259 "Checking the network"
Note
• When performing network settings, you are required to
press [APPLY NOW] after changing the settings to initialize
the NIC. Pressing [APPLY NOW] displays the message
“NETWORK INITIALIZING” at the lower left of the screen in
a few seconds. The time for this message to appear differs
depending on the setting.
This message disappears when the setting is complete.
FINISHER
ADJUSTMENT
Improves the alignment with the
relevant print settings enabled if
the output paper is conspicuously
misaligned.
There are 6 items below.
• PLAIN/THICK1/SORT/NON-
SORT/LG
• THICK2
• THICK3
• THICK4
• 1SIDE STAPLE/LG
• 1SIDE STAPLE
(The equipment reboots after the
setting is switched.)
Item name Description
SCAN SPEED Reduces distortion by lowering the
scanning speed of the RADF. (The
equipment reboots after the setting is
switched.)
Item name Description
PAPER
MISFEED
RECOVERY
Enabling this option displays a message
asking the user if he or she wants to
continue with the job being executed when
the paper misfeed occurred.
Item name Description

Oki MB770dn Specifications

General

Brand	Oki
Model	MB770dn
Category	All in One Printer
Language	English