SETTING ITEMS (ADMIN)
- 241 -
4
Press [YES].
The installation begins.
Note
• Do not remove the USB storage device until the data
transfer is complete. Removing the device while data
are being transferred could destroy them or cause a
malfunction of the equipment.
5
When the installation is complete, press
[OK].
The option which has just been installed is displayed on
the LICENSE MANAGEMENT screen.
Note
• If the installation fails, the message “It failed in the
installation. Do you retry?” will be displayed on the
CAUTION screen. In this case, press [YES] to perform
the installation again.
6
Remove the USB storage device from the
USB port on the equipment.
Memo
• After the installation is complete, it is necessary to
reboot the equipment. When the message “Reboot the
machine” is displayed on the touch panel, turn the
power of the equipment OFF and then back ON by
using the [POWER] button on the control panel.
Adding or removing display languages
You can add new languages to be used on the touch panel,
and also remove those you no longer need. Furthermore, from
this menu, you can also change the default language used on
the touch panel to a different one.
P.241 "Adding a language"
P.242 "Removing a language"
P.243 "Setting the default language"
Memo
• The following language packs are initially installed on the
equipment.
• When adding a language, store the desired language pack
in the root directory of your USB storage device in advance.
• For information of languages which can be newly added,
contact your dealer.
Adding a language
1
On the LANGUAGES screen, press
[INSTALL].
The LOCALIZATION PACK INSTALLATION screen is
displayed.
2
Connect your USB storage device in which
the language pack is stored to the USB port
on the equipment, and press [OK].
The SELECT A FILE screen is displayed.
English (US) English (UK) German
French Spanish Italian
Danish Finnish Norwegian
Swedish Dutch Polish
Russian Japanese
Simplified Chinese
Traditional Chinese
Turkish
To Next Page
Loading...
Need help?
General
