Oki MB770dn User Manual

PRINTING FROM WINDOWS
- 29 -
2
1
3
4
5
6
7
6) [Customization]
This sets options specific to PCL6 or PostScript, or
changes the Plug-in settings or the printer driver language.
When you click this, the [Customization] dialog box
appears.
 P.31 "Customization: [Plug-in] tab"
 P.31 "Customization: [Language] tab"
 P.31 "Customization: [PDL Settings] tab"
Note
• The Printer Language setting is available only for the
printer drivers below.
-PCL
- PS3
7) [Version Information]
Click this to display the [Version Information] dialog box.
8) Device Settings Retrieval
This enables SNMP communication between this
equipment and your computer to retrieve the option
configuration information.
Update Automatically
Select this check box to update the option configuration
information automatically every time you open the [Device
Settings] tab.
[Update Now]
Click this to obtain the configuration information from this
equipment immediately.
Memo
• If the connection to the equipment has not been
configured correctly, the message “The address of your
machine could not be located. Would you like to find it?”
will be displayed when you click [Update Now]. If it is
displayed, click [Yes] and search for the equipment
using the [Local Discovery] dialog box. After searching
for the equipment, SNMP communication will be
enabled. For the instructions on how to search for the
equipment, refer to the instructions of
TopAccessDocMon.
Note
• If you disable SNMP Communication,
TopAccessDocMon notification also will be disabled.
9) [Restore Defaults]
Click this to restore the configuration of this equipment
displayed in the [Device Settings] tab menu to the original
factory defaults.
Tray Settings
1) Paper Size
Select the paper size set in each tray.
2) Paper Type
Select the paper type set in each tray.
3) Attribute
Select the attribute of the paper. When you set the attribute,
the tray will be selected preferentially according to the print
settings.
4) Override Application Paper Source Settings
Select this check box to use the paper source setting in the
printer driver rather than the application setting.
5) [Restore Defaults]
Click this to restore the settings displayed in the [Tray
Settings] dialog box to the original factory defaults.
Memo
• Trays selectable differ depending on the option
configuration.
Account Settings
1
2
3
4
5
1
2
3
4
5
6
7

Oki MB770dn Specifications

General

Brand	Oki
Model	MB770dn
Category	All in One Printer
Language	English