Oki MB770dn User Manual

SETTING ITEMS (ADMIN)
- 282 -
2
1
3
4
5
6
7
Selecting WEP security mode
The WEP is a data encryption method using the WEP key
between the Access Point and other wireless devices.
1
Press [WEP] and press [NEXT].
The WIRELESS ENCRYPTION - WEP screen is
displayed.
2
Enter the following items and press [NEXT].
• WEP ENCRYPTION
Select the bit length of the WEP key.
•KEY FORMAT
Select the character code for the WEP key.
• WEP KEY
Press this to enter the WEP key.
The maximum length of WEP key varies depending on
the WEP Encryption and Key Entry Method.
Memo
• When pressing WEP KEY button, the letter entry
screen is displayed. Enter the value using the
keyboard and digital keys, and press [OK] to set the
entry.
3
Select the transmit power and press
[NEXT].
Select the low transmit power if you want to limit the area
that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
4
Confirm the settings and press [FINISH].
Memo
• If you want to change the settings, press [PREV] to
move back to the screen that you want to change and
then repeat the operation.
5
Press [YES], and wait until the setting is
reflected.
Selecting no security mode
You can also set no security for wireless access.
Note
• If you do not set no security, anyone knows how the SSID
can connect to the wireless network. Therefore, it is
recommended to set the security if it is possible.
64 bit 128 bit 152 bit
HEX: 10 26 32
ASCII: 5 13 16

Oki MB770dn Specifications

General

Brand	Oki
Model	MB770dn
Category	All in One Printer
Language	English