SETTING ITEMS (ADMIN)
- 286 -
2
Proceed with the operation that you
require.
If you selected [EAP-MSCHAPv2], [EAP-MD5] or [EAP-
TLS], proceed to step 5.
3
Select the inner authentication method and
press [Next].
Selecting inner authentication method is necessary only
when you selected [PEAP] or [EAP-TTLS] in step 3.
4
Specify the following items as required and
press [Next].
Memo
• When you press [EAP USER NAME], [PASSWORD],
or [RETYPE PASSWORD], the on-screen keyboard is
displayed.
For details of the on-screen keyboard, see the
following page:
 P.300 "On-screen keyboard"
When you selected [PEAP]:
When you selected [EAP-TTLS]:
When you selected other than [EAP-TLS]:
When you selected [EAP-TLS]:
Item name Description
EAP USER NAME Press this button to enter the EAP
user name.
PASSWORD Press this button to enter the
authentication password.
RETYPE
PASSWORD
Press this button to enter the
authentication password again.
Use Username
from Common
Name in the User
Certificate
To set the common name in the
user certificate installed in this
equipment as EAP user name,
press [ENABLE].
Note
• If you set this item to [ENABLE],
you will not be able to enter
[EAP USER NAME].
To Next Page
Loading...
Need help?
General
