APPENDIX
- 320 -
ENABLE ALERTS TRAP Shows whether the alerts trap is enabled or disabled. NO
IP TRAP ADDRESS1 Shows the IP address that has been set for IP trap
address 1.
NO
IP TRAP COMMUNITY Shows the IP Trap community name. NO
IPX TRAP ADDRESS Shows the IPX trap address. NO
NETWORK SETTING - NETWORK SERVICE - SNTP SERVICE
Function Description User
ENABLE SNTP Shows whether SNTP is enabled or disabled. NO
PRIMARY SNTP ADDRESS Shows the primary SNTP server address if it has
been set.
NO
SECONDARY SNTP ADDRESS Shows the secondary SNTP server address if it has
been set.
NO
PORT NUMBER Shows the port number to be used for accessing the
SNTP server.
NO
SCAN RATE Shows the scan rate to check the SNTP server for
adjusting the time setting.
NO
NTP AUTHENTICATION Shows whether the NTP authentication is enabled or
disabled.
NO
NETWORK SETTING - NETWORK SERVICE - TELNET SERVICE
Function Description User
ENABLE TELNET Shows whether the TELNET service is enabled or
disabled.
NO
PORT NUMBER Shows the port number to be used for the TELNET
service.
NO
USER NAME Shows the user name for the TELNET service. NO
NETWORK SETTING - NETWORK SERVICE - FILTERING
Function Description User
ENABLE IP FILTERING Shows whether the IP filtering is enabled or disabled. NO
ENABLE MAC ADDRESS FILTERING Shows whether the MAC address filtering is enabled
or disabled.
NO
NETWORK SETTING - PRINT SERVICE SETTING - RAW TCP PRINT
Function Description User
ENABLE RAW TCP Shows whether Raw TCP printing is enabled or
disabled.
NO
PORT NUMBER Shows the port number to be used for Raw TCP
printing.
NO
NETWORK SETTING - PRINT SERVICE SETTING - LPD PRINT
Function Description User
ENABLE LPD Shows whether LPR printing is enabled or disabled. NO
PORT NUMBER Shows the port number to be used for LPR printing. NO
BANNERS Shows whether a banner will be printed for each
LPR print job.
NO
NETWORK SETTING - NETWORK SERVICE - SNMP NETWORK SERVICE
Function Description User
To Next Page
Loading...
Need help?
General
