Omron fq2 User Manual

Controlling Operation and Outputting Data with TCP No-protocol Communications
FQ2 User’s Manual
369
Connecting through Ethernet
9
Set Image Adjustment Data
This command sets parameters or measurement values from a position compensation item or filter item.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Inspection item number Specifies the item number of the position compensation item or of the filter item.
External reference data
number
Specifies the external reference data number.
12-2 External Reference Parameters: p. 430
Set value Specifies the set value.
12-2 External Reference Parameters: p. 430
PO ON DATA CR SI IT
External reference data
(4 digits max.)
Set value
Command
Space
(0x20)
Space
(0x20)
Delimiter
Item
number
Space
(0x20)
Space
(0x20)
Command
or
DP
Set value
CR
Delimiter
Space
(0x20)
Space
(0x20)
External
reference data
(4 digits max.)
Space
(0x20)
Space
(0x20)
Item
number
CR OK
Delimiter
CR ER
Delimiter

Omron fq2 Specifications

General

Brand	Omron
Model	fq2
Category	Digital Camera
Language	English