Oracle ZFS ZS3 Series Customer Service Manual

Servicing the ZS3-2 Controller
11.
Connect data cables to the PCIe card, routing them through the cable
management arm.
12.
When the system has finished booting, log in and set the time using the steps
in the task “Setting Clock Synchronization using the BUI” in Oracle ZFS Storage
Appliance Administration Guide, Release 2013.1.5.0.
Servicing the ZS3-2 Controller
This section describes how to service the ZS3-2 controller.
ZS3-2 Controller Hardware Overview
This section describes the internal and external components of the Oracle ZFS Storage ZS3-2
controller.
ZS3-2 Base Configuration
The ZS3-2 controller is an enterprise-class, rackmount x86 system powered by the Intel Xeon
processor. It provides high performance and room for growth with expandable PCIe slots and
16 DIMM slots in a compact 2U footprint.
TABLE 22
ZS3-2 Controller Features
CPU Memory Readzilla Boot Drive PCIe Slots HBA
2x8-core, 2.1
GHz
256GB
16x16GB
512GB
16x32GB
1-4 1.6TB
SAS-2 SSDs
2x2.5-inch
900GB SAS-2
2 dedicated; 4
available
4-port (4x4)
SAS-2 6Gb/s
external
Refer to the product site at https://www.oracle.com/storage/nas/index.html for the most
recent component specification.
ZS3-2 Front Panel
The ZS3-2 controller drive slots and front panel components are shown in the following figure.
112 Oracle ZFS Storage Appliance Customer Service Manual • February 2016

Oracle ZFS ZS3 Series Specifications

General

Brand	Oracle
Model	ZFS ZS3 Series
Category	Storage
Language	English