Oracle ZFS ZS3 Series Customer Service Manual

How to Install Optional PCIe Slot Cards in Order
Slot Mfg Part Number Description Max Note
4-6 7023303 2-port 16Gb FC
HBA
4 Optional FC target or
initiator (backup)
4-6 375-3696-01 2-port InfiniBand
CX2 HCA
4 Optional
recommended front-
end
4-6 7051223 2-port 10Gb Ethernet
Optical NIC
4 Optional
recommended front-
end
4-6 7070006 2-port 10Gb Ethernet
Copper Base-T NIC
4 Optional
recommended front-
end
How to Install Optional PCIe Slot Cards in Order
Install optional PCIe cards in the following order:
1.
Install optional second 4x4 SAS-2 HBA (7067091) in slot 3.
Note - For the remainder of PCIe option cards, always start installing in slot 6 and then work
down to slot 3 in this order:
2.
Install InfiniBand CX2 HCA (375-3696-01) in slot 6 and continue until all
InfiniBand options are installed and or,
3.
Install 10Gb Ethernet Optical NICs (7051223) and or,
4.
Install 10Gb Ethernet Copper NICs (7070006) and or,
5.
Install 8Gb FC HBAs (371-4325-02) or 16Gb FCs HBA (7023303) and or,
6.
Install 1Gb Ethernet Copper NICs (7070195).
ZS3-2 Connectors
This section describes the ZS3-2 serial management port, network management port, Ethernet
ports, and cluster I/O ports.
ZS3-2 Serial Management Port
The serial management connector (SER MGT) is an RJ-45 port and provides a terminal
connection to the service processor (SP) console.
124 Oracle ZFS Storage Appliance Customer Service Manual • February 2016

Oracle ZFS ZS3 Series Specifications

General

Brand	Oracle
Model	ZFS ZS3 Series
Category	Storage
Language	English