Servicing the ZS3-4 Controller
FIGURE 20
ZS3-4 Controller Fan Modules
■
Front and rear Service Action Required LEDs
■
Fan Module Service Action Required (TOP) LED on the front of the server
■
Fan Fault LED on or adjacent to the faulty fan module
The system Overtemp LED might light if a fan fault causes an increase in system operating
temperature.
ZS3-4 NIC/HBA Options
This table describes NIC/HBA PCIe card options for ZS3-4 standalone and cluster
configurations.
TABLE 19
ZS3-4 Controller NIC/HBA Options
Mktg Part Number Description
SG-SAS6-INT-Z 8-port 6Gb/s SAS-2 internal HBA
SG-XPCIE2FC-QF8-Z 2-port 8Gb FC HBA
7103791 4-port (4x4) SAS-2 6Gb/s external HBA
7101674 2-port 16Gb FC HBA
7100477 4-port 1Gb Ethernet Copper UTP
Servicing the Hardware 85
To Next Page
Loading...
Need help?
General